INCINERATOR DIESEL FIRED
Incinerator 20 Kg Incinerator electrically operated including: A cage for receipt of biomedical waste; A combustion chamber with fireplace with a filter to retain ashes; A cover; An air supply; A turbine allowing supply air. Combustion temperature: 1800 ° C. Comes with all accessories. ▪ The incinerator should be a modern waste disposal unit, designed to bum medical waste in a clean and environmentally efficient manner. It should employ a temperature based logic control system to provide optimum control of the operating conditions and incorporate a high capacity thermal oxidizing secondary chamber. It should be designed to retain the exhaust gases, for at least 2 seconds to ensure the unit’s effective destruction of the combustion products. ▪ All the incinerators to be supplied and installed meet the Waste Management Regulation 2006, legal notice No. 121 of 29th September 2006 and in particular 3rd schedule…
hospital incinerator manufacturer
Incinerator to have double combustion chamber and control amount of dioxin and other gasses emitted without being harmful. Estimated dimensions, to manufacturers standard, but to be compact as possible. capacity: approximately 60kg per day, voltage: 220V and diesel fired. CSH Hospital, (Calabar, Nigeria) Mmedical waste incinerator capable of disposing up to 0.5 cubic meter of infectious or pathological waste. Incinerator to have double combustion chamber and control amount of dioxin and other gasses emitted without being harmful. Estimated dimensions, to manufacturers standard, but to be compact as possible. capacity: approximately 120kg per day, voltage: 220V and diesel fired.INCINERATOR (WASTE INCINERATOR) Designed to burn disposables that can and should be destroyed on-site. Theses wastes include infectious and contaminated “red bag.” Surgical dressings, plastic test devices and other wastes Fast, complete, efficient waste disposal Dual chamber combustion, Chambers insulated and lined with high temperature refractory. Programmable digital temperature controls, temperature indicators and…
incinerator suppliers
incinerator suppliers.7) Burn rate: 15 – 20 Kg/h 8) Capacity: not less than 130 L 9) Concentrations of most pollutants in stack gases below detection limits 10) Diesel fuel 11) Electronic system control 12) Easy to operate and minimal training 13) Any accessory or dedicated device necessary to the proper functioning and utilization of the equipment included.Incinerator medical waste diesel, construction in painted steel aluminum resistant to high temperatures, device control indicator flame, reload indicator, temperature control device, burning capacity of 250kg / 10 hours in 2 stages (primary camera and secondary camera). One furnace to be installed in a hospital of 440 architectural beds and 375 administrative beds. This furnace should have the capacity to burn from 180 to 220 kilogram per day of medical waste and organic waste. 2. One furnace to burn expired medicine that can incinerate around 500 kg of medicines or around 4,000 kg of…
incinerator for medical waste
incinerator for medical waste.Controlled air medical waste incinerator designed for incineration of bio-medical waste generated at a blood-processing center. The waste to be treated mainly includes bio-waste (i.e. bodily fluids), infectious and hazardous waste such as syringes, needles, and other medical waste (i.e. silicon rubbers, plastic, textiles, papers, packs, etc.). a diesel fired medical waste incinerator with a capacity of 300Kg/hr. to be installed at a waste disposal site away from populated areas. Standards 1) Bidder or Manufacturer ISO 9001 Certified 2) Respecting international emission standards Electrical characteristics 3) A 230V, 60Hz single-phase electrical source. 4) Protections against over-voltage and over-current line conditions. 5) Compliance with applicable Ghanaian standards and regulations. Operational characteristics 6) Two-stage incineration with dual chamber combustion.Incinerator with Oil Burner . Require Quantity – 1 complete Unit / Set Type of Materials To be Burn – Solid Waste Burner Capacity – 0.2 Kw ( 200 watts )…
Medical Waste Incinerator Capacity Average 100kgs per hour
Temperature Display & PLC Control Case Primary Combustion Chamber Incinerator Main Body Italy Oil/Gas Burner ***Primary Combustion Chamber ***Secondary Combustion Chamber***Smoke Filter Chamber ***Chimney:10.0Meters ***Incinerator PLC Control Case ***Italy oil/gas burner: 02 units ***Oil Tank (if oil fuel): 200Liters Items/Model TS100(PLC) Principle Waste Incineration Treatment Burn Rate Average 100 kg/hour Feed Capacity Average 200kg/feeding Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber 1200L Internal Dimensions 120x100x100cm Secondary Chamber 600L Smoke Filter Chamber Yes(Dry Scrubber) Feed Mode Manual Voltage 220V Power 0.7Kw Oil Consumption (kg/hour) 14–28 Gas Consumption (m3/hour) 10–32.2 Temperature Monitor Digital Display Temperature Protection Yes Oil Tank 200L Feed Door 80x60cm Chimney 10Meter Chimney Type Stainless Steel 1st. Chamber Temperature 800℃–-1000℃ 2nd. Chamber Temperature 1000℃-1200℃ Residency Time 2.0 Sec. Gross Weight 6000kg External Dimensions 260x150x180cm HICLOVER – Medical Environmental WWW.HICLOVER.COM Waste Incinerators Medical Waste Incinerator Pet Animal Cremation Solid Waste Incinerator Tel: +86-25-8461 0201 Mobile: +86-13813931455(whatsapp/wechat)Website: www.hiclover.com Email: [email protected]Email: [email protected] Nanjing Clover Medical Technology Co.,Ltd. 2020-02-16
Containerized Mobile Incinerator Model CA50
Waste Incinerator (Containerized Mobile Incinerator) Capacity: Average 50 kgs per hour Model CA50 Internal Dimensions 100 x 80 x 70 cm Main Product List Primary Combustion Chamber Secondary Combustion Chamber Smoke Filter Chamber Incinerator Control Case Chimney:5.0Meters *(upgrade to Stainless Steel, free cost) Italy oil/gas burner: 02 units Oil Tank (if oil fuel): 200Liters ISO 20′ Container(Delivery with Incinerator) Model CA50 Waste Treatment Waste Incineration Treatment Feed Capacity Average 100 kgs per feed Burning Rate Average 50 kgs per hour Burning Time per Feed Average 2 hour Control Mode PLC(Programmable Logic Controller Incinerator) Voltage 220V Power 0.7Kw Fuel Diesel oil Burner Italy Burner Feed Mode Manual Temperature Monitor Digital Display Fuel consumption (Oil) Average 16.6 Kgs/Hour Internal Dimensions 100x80x70cm (Primary Chamber) External Dimensions 230 x 130 x 155cm (main body) Waste combustion chamber 560Liters Post Combustion Chamber 280Liters Oil Tank Capacity 200 Liters Door Opening 70 x 50cm Chimney 5.0M…
INCINERATEUR COMBUSTION DESTRUCTION OF MEDICAL WASTE PYROLYTIC AND LABORATORY
Use diesel, construction in painted steel resistant aluminium at high temperatures, flame device control indicator, charging indicator, temperature control device, burning capacity of 250 kg / hour in two stages (primary and secondary camera) INCINERATEUR COMBUSTION DESTRUCTION OF MEDICAL WASTE PYROLYTIC AND LABORATORY 1. CAPACITY OF WASTE DISPOSAL: 50à60 kg / h 2. CAPACITY OF OPERATION WITHOUT STOPPING: 10h 3. SUITABLE FOR WASTE CATEGORIES A, B, C, D AND E MEDICAL WASTE BY UNEP AND WHO 4. COMBUSTION “PYROLYSIS” by controlling the waste gasification 5. CALORIFIC LOWER (LCP) WASTE OF THESE MUST BE OF 3500 KCAL / H. an incinerator with loading indicator, temperature control functions and with two chambers (primary and secondary). 6. TEMPERATURE MAX 1400oC DESTRUCTION 7. MIN TEMPERATURE OF DESTRUCTION 850oC 8. BURNING ROOM NUMBER: 2 (PRIMARY AND SECONDARY) 9. VOLUME CHAMBER: 1200L 10. DIMENSION OF THE LOADING DOOR: 70CMX70CM 11. FUEL TYPE: DIESEL 12. POWER SUPPLY:…
Model TS30 oil fired waste small incinerator 30kgs
Model TS30 oil fired waste small incinerator 30kgs/hr. Items/Model TS30(PLC) Picture Burn Rate Average 20-30 kg/hour Feed Capacity Average 60kg per feeding Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber 330L Internal Dimensions 75x75x60cm Secondary Chamber 180L Smoke Filter Chamber Yes Feed Mode Manual Feeding Voltage 220V Power 0.5Kw Oil Consumption (kg/hour) Average 13.3 Gas Consumption (N.G, m3n/Hour) Average 16 Gas Consumption (L.P.G, m3n/Hour) Average 11.7 Temperature Monitor Four Digital Display Temperature Protection Yes Oil Tank 100L or More(Optional) Feed Door 55x50cm Chimney 5Meter or More(Optional) Chimney Type Stainless Steel 1st. Chamber Temperature 800℃–-1000℃ 2nd. Chamber Temperature 1000℃-1200℃ Residency Time 2.0 Sec. Gross Weight 4000kg External Dimensions 175x120x140cm HICLOVER – Medical Environmental WWW.HICLOVER.COM Waste Incinerators Medical Waste Incinerator Pet Animal Cremation Solid Waste Incinerator Tel: +86-25-8461 0201 Mobile: +86-13813931455(whatsapp/wechat)Website: www.hiclover.com Email: [email protected]Email: [email protected] Nanjing Clover Medical Technology Co.,Ltd. 2020-02-14
Medical waste incineration system
Medical waste incineration system of 300 kg/hr burn rate with dual fuel (gas and diesel) type, daily 8-16 hrs operation and a stack height of 15 meter.Primary combustion i. The primary combustion chamber shall be accepted as the primary combustion zone; ii. The minimum combustion temperature of the primary chamber shall not be less than 800 degrees C; Secondary combustion The residence time in the secondary chamber shall not be less than 2 seconds; The gas temperature as measured against the inside wall in the secondary chamber, not in the flame zone, shall not be less than as indicated in Lots 1-7 ; Both the primary and the secondary temperatures shall be maintained until all the waste has been completely combusted; Chimney The chimney shall have a minimum height of 4 meters above ground level; The minimum exit velocity of the emissions shall not be less than 10 metres/second;1. Capacity…
Hiclover waste incinerator
Key Features: — Full range incinerator with Economized Small Scale incinerator, Standard Small-Large Scale incinerator, General Municipal Solid Waste Incinerator, Pet and Animal Cremation, Containerized Mobile Incinerator, High Efficient Environmental Waste Incinerator. — Single combustion chamber, double combustion chambers, three combustion chambers and multi-combustion chambers waste incinerators. — System solutions for medical waste environmental. — High burn rate, from 5kgs to 1000kgs per hour. — New Design for pet animal cremation business. — HICLOVER, trusted partner with years of experience. HICLOVER, Nanjing Clover Medical Technology Co.,Ltd, supply system solutions for medical environmental protection, animal and pet cremation engineering, other municipal solid waste incineration project. We supply single combustion chamber, double combustion chambers, three combustion chambers and multi-combustion chambers waste incinerators for laboratory, clinic, hospital, medical center, hygiene clinical waste destruction with medical disposable, biological waste, medical plastic waste, hazardous waste, red bag waste, needle disposal, gauze and bandages, sealed sharp…